Accessing The Cli From The Ms-Dos Prompt; Accessing The Cli From The Windows Start Button - Adaptec RAID 2810SA Software Reference Manual

Accessing the CLI from the MS-DOS Prompt

To access the CLI from the MS-DOS prompt, move to the directory
containing the afacli executable and then type afacli .
Note:
To access the CLI from any location, the path in the
Windows NT/Windows 2000 (basic disk only)/Windows
XP (basic disk only) Registry or System Variables must
include the directory where the CLI executable is installed.
Or, you must be in the directory where the CLI executable
resides.
See your Windows NT or MS-DOS documentation for more
information.
Accessing the CLI from the Windows Start
Button
You can execute the command line interface (CLI):
From the Windows XP, Windows 2000 or Windows NT Start
button
Note:
accepted the default location for the software
during installation.
To access the CLI from the Windows XP (basic disk only),
Windows 2000(basic disk only) or Windows NT Start button:
1
Click the Start button and move the mouse cursor to
Programs. Click on Programs.
2
Move the mouse cursor to SMBE. The Adaptec program
group will display.
3
Move the mouse cursor to the CLI icon. Click on CLI.
Accessing the Command Line Interface
The following procedure assumes that you
2-2