The Ctr And State Items - Adaptec RAID 2810SA Software Reference Manual

The Ctr and State Items

The Ctr item displays the ID number of the array associated with the
task. In the example, the array's ID is 0 (zero).
The State item displays the state of the task along with a running
percentage value that indicates the progress of the currently running
task. The item shows the percentage in tenths of a percent
increments. The currently running task is complete when the State
item displays 100%.
Table 3-8 describes the state values that the State item can display.
State
BAD
DNE
RUN
SUS
UNK
Syntax and Conventions for CLI Commands
Table 3-8. State Values
Meaning
The task failed and is no longer running.
The task successfully completed or the task is
no longer running (that is, the task is done).
The task is running.
The task was suspended. Typically, you
suspend a task with the task suspend
command.
The controller reported an unknown status for
the task.
3-12