Adaptec RAID 2810SA Software Reference Manual page 101

Serial ata raid command line interface
Hide thumbs Also See for RAID 2810SA:
Table of Contents

Advertisement

The Done % Column
This column displays a running percentage value that indicates the
progress of the currently running task. The display shows the
percentage in tenths of a percent increments. The currently running
task is complete when the Done % column displays 100%.
The Ent Column
This column displays the number of elements associated with each
array. The maximum is 16 elements.
The Creation Date and Creation Time Columns
The Creation Date column displays the date on which you created
the array. The following example shows an example of a date that
can appear in this column:
082999
As the example shows, the command displays the date in the form
where
mmddyy
is a two-digit number that indicates the month in which
mm
you created the array. For example, 01 indicates the month of
January, 12 indicates the month of December, and so forth.
is a two-digit number that indicates the day of the month in
dd
which you created the array. For example, 29 indicates the 29th
day.
indicates the year you created the array. For example, 97
yy
indicates the array was created in the year 1997.
The Creation Time column displays the time in 24-hour format at
which you created the array. The following example shows an
example of a time that can appear in this column:
11:55:49
As the example shows, the command displays the time in the form
where
hhmmss
is a two-digit number that indicates the hour at which you
hh
created the array.
is a two-digit number that indicates the minute at which
mm
you created the array.
container Commands
5-62

Advertisement

Table of Contents
loading

Table of Contents