Controller Details; Syntax; Examples - Adaptec RAID 2810SA Software Reference Manual

controller details

To display details about the currently opened controller and
software, use the controller details command. These details
include the controller type and software revision levels.

Syntax

controller details

Examples

The following example shows sample output as a result of using the
controller details command:
AAC0> controller details
Executing: controller details
Controller Information
----------------------
Remote Computer: .
Device Name: AAC0
Controller type: Adaptec 2410SA
Access Mode: READ-WRITE
Controller serial number: Last six digits = 8A277A
Number of Buses: 1
Devices per Bus: 15
Controller CPU:
Controller CPU speed: 100 Mhz
Controller Memory: 144 Mbytes
Battery State: Not present
Component Revisions
-------------------
CLI: 3.0-0
API: 3.0-0
Miniport Driver: 3.0-0
Controller Software: 3.0-0
Controller BIOS: 3.0-1
Controller Firmware:
Controller Hardware: 3.3
The following sections provide more information on the items that
the controller details command displays.
Device Name Item
The Device Name: item displays the name of the controller. This is
the controller name specified when you opened the controller with
the open command. In the example, the controller name is AAC0.
i960
(Build #5523)
(Build #5523)
(Build #5131)
(Build #5478)
(Build #5523)
(Build #5478)
controller Commands
6-2