Adaptec RAID 2810SA Software Reference Manual page 99

with the container readonly and container readwrite
commands.
Some CLI commands cause an array to temporarily become read-
only without the use of the container readonly command.
The Lk Column
This column displays the letter L if the array is locked. Otherwise, if
the array is not locked, the column displays a blank space. You can
explicitly lock and unlock an array with the container lock and
container unlock commands.
Some CLI commands (during their execution) cause the array to
become locked. Typically these commands unlock the array upon
completing execution.
The Task Column
This column displays the task or tasks running on a specified array
or SCSI disk. Specifically, the column can display the items listed in
Table 5-4.
Task Meaning
A create mirror set or create multilevel mirror set task
Create
is running on the specified array. When the create
mirror set or create multilevel mirror set task
completes, the specified array is a mirror set or a
multilevel array of mirror sets. The create a mirror set
or create a multilevel mirror set task runs as a result of
using the
container create mmirror
An array format FAT file system task is running on the
FmtFAT
specified array. The format FAT file system task runs as
a result of using the container format command
with the
An array format NTFS file system task is running on
FmtNTFS
the specified array. The format NTFS file system task
runs as a result of using the container format
command with the
NTFS
Table 5-4. Task Types
container create mirror
/file_system switch set to
/file_system
.
container Commands
or
command.
FAT .
switch set to
5-60