Related Information - Adaptec RAID 2810SA Software Reference Manual

Use the container list command after using the container
remove drive_letter command to display information about
the array on which you just removed a drive letter, as in the
following example:
AAC0>container list
Executing: container list
Num Total Oth Stripe
Dr Label Type Size Ctr Size
-- ----- ------ ------ --- ------ ------- ------ -------------
0 Volume 10.0MB
As the result of removing a drive letter from an array (in this
example, array 0) with the container remove drive_letter
command:
The Dr column no longer displays the drive letter assigned in a
previous use of the container assign drive_letter
command. In this example, the letter
Dr column.

Related Information

container commands:
container list
Scsi Partition
Usage C:ID:L Offset:Size
NTFS 0:02:0 64.0KB:
no longer appears in the
F
(page 5-54)
container Commands
10.0MB
5-85