Examples - Adaptec RAID 2810SA Software Reference Manual

For UNIX, the RAID-5 set is always scrubbed.
/wait{=boolean}
Specifies whether the command prompt returns only after the
parity-protect operation completes. If you set this switch to
TRUE, the command prompt returns only after the RAID-5 set
is parity-protected. The scrub or zero action completes.
The default is FALSE
immediately before the parity-protect operation completes.

Examples

The following example creates a RAID-5 set with the following
characteristics:
Creates the RAID-5 set on four disk drives connected to
channel 0
Specifies a freespace of 10 MB
Uses the scrub method
Indicates the command prompt return only after the scrub
operation completes
Specifies a stripe size of 64 KB
Accepts the default label
the command prompt returns
;
container Commands
5-27