Adaptec RAID 2810SA Software Reference Manual page 211

disk Commands
Examples
The following example synchronously verifies and repairs all blocks
on disk (0,2,0):
AAC0>disk verify /repair=TRUE /wait=TRUE (0,2,0)
Executing: disk verify (CHANNEL=0,ID=2,LUN=0)
As the command executes, note the title bar of the DOS window
displays the status of the command. For example:
Stat:OK!Task:100,Func:SCV,State:RUN 97.2%
See page 3-9 for detailed information on the status information that
the command displays in the title bar as it executes the task.
7-27