Scsi_Device - Adaptec RAID 2810SA Software Reference Manual

a quotation mark of the same type used to surround the string can
be specified by repeating that quotation mark twice in the string.
Table 3-3 lists examples of valid strings and their corresponding
values:
Table 3-3. Strings and Corresponding Values
String
VOL_set
"VOL label"
'Use " mark'
"Use ' mark"
"Use Both "" and ' mark"

scsi_device

Specifies a device. Device descriptions have three parts: SCSI
channel number, device ID, and device logical unit number (LUN).
The following syntax defines the scsi_device parameter:
({integer},{integer},{integer})
Each integer corresponds to one component of a device descriptor or
specifier: the first integer is the SCSI channel number, the second
integer is the device ID, and the third integer is the device LUN.
The actual values that the CLI supports are as follows:
Channel number = (for example, 0, 1, 2, 3, and so on). See the
installation guide for your controller to determine the actual
number of channels it supports.
Device ID = (0 through 15 inclusive)
LUN = 0 through 7 inclusive
Table 3-4 displays the syntax for device switch value type
abbreviations:
Syntax and Conventions for CLI Commands
Value
VOL_set
VOL label
Use " mark
Use ' mark
Use Both " and ' mark
3-7