Examples - Adaptec RAID 2810SA Software Reference Manual

from the label specified with the container format
command.

Examples

Before creating a volume set, use the disk show space command
to obtain information about the available devices, as in the following
example:
AAC0>disk show space
Executing: disk show space
Scsi C:ID:L Usage Size
----------- --------- -------------
0:00:0 Free 64.0KB:
0:01:0 Free 64.0KB:
0:02:0 Free 64.0KB:
0:03:0 Free 64.0KB:
0:04:0 Free 64.0KB:
0:05:0 Free 64.0KB:
0:06:0 Free 64.0KB:
0:08:0 Free 64.0KB:
The example list shows that there are eight SCSI disks available to
create the volume set.
The following example creates a volume set on SCSI disk
with a freespace of 15 MB:
AAC0>container create volume ((0,2,0), 15M)
Executing: container create volume ((CHANNEL=0,ID=2,LUN=0),15,728,640)
container 0 created
On UNIX systems, the message displayed after you execute the
container create volume command includes the root special
file associated with the newly created volume set.
Use the container list command after executing the
container create volume command to display information
about the volume set, as in the following example:
AAC0>container list
Executing: container list
Num Total Oth Stripe
Dr Label Type Size Ctr Size
-- ----- ------ ------ --- ------ ------- ------ -------------
0 Volume 15.0MB
container Commands
11.0MB
11.0MB
49.0MB
49.0MB
49.0MB
49.0MB
11.0MB
11.0MB
Scsi Partition
Usage C:ID:L Offset:Size
None 0:02:0 64.0KB:
(0,2,0)
15.0MB
5-37