Adaptec RAID 2810SA Software Reference Manual page 72

0 Stripe 45.0MB
The following list describes the items in the display that contain
information as the result of creating a stripe set with the container
create stripe command:
The Num Label column displays the ID number of the newly
created stripe set, which in the example is 0.
If you specify a label when creating the stripe set, it appears in
this column. Because no label was specified when the stripe set
was created, no label appears in the column.
On UNIX systems, the root special file associated with the
array also appears in this column.
The Type column displays the type Stripe, to indicate that
the newly created array is a stripe set.
The Total Size column displays the size of the freespace that
makes up the stripe set. In this example, the total size consists
of the freespace (15.0 MB) specified with SCSI device (0,2,0)
and equal sizes associated with devices (0,3,0), and (0,4,0) for a
total of 45.0 MB.
The Stripe Size column displays the stripe size you specified
for the stripe set. In this example, the stripe size is the default
(32 KB).
The Usage column displays None to indicate that the newly
created stripe set does not have a file system on it. To create an
NTFS or FAT file system on an array, use the container
format command.
64KB None 0:02:0 64.0KB:
0:03:0 64.0KB:
0:04:0 64.0KB:
container Commands
15.0MB
15.0MB
15.0MB
5-33