Organization - Adaptec RAID 2810SA Software Reference Manual

technology, the software has been adapted by mapping of ports 0
through 3 to the following SCSI IDs:
Bus 0, ID 0, Lun 0
Bus 0, ID 1, Lun 0
Bus 0, ID 2, Lun 0
Bus 0, ID 3, Lun 0
In general, SCSI IDs will be populated from Bus 0, ID 0 upwards
(always LUN 0).

Organization

Chapter 1, Getting Started, provides an overview of this reference
guide.
Chapter 2, Accessing the Command Line Interface, provides
information on the ways you can access the CLI.
Chapter 3, Syntax and Conventions for CLI Commands, describes the
features, conventions, command syntax, parameters, and value
types that define the command line interface.
Chapter 4, General Control Commands, details general purpose
commands such as open and close.
Chapter 5, container Commands, describes all the commands related
to arrays.
Chapter 6, controller Commands, describes all the commands related
to controllers.
Chapter 7, disk Commands, describes the commands related to disks.
Chapter 8, logfile Commands, describes the commands used to record
CLI command activities.
Chapter 9, task Commands, describes the commands used to work
with tasks.
Appendix A, Automated Scripts, provides examples of how to use the
CLI commands in DOS command scripts.
Getting Started
1-3