Adaptec RAID 2810SA Software Reference Manual page 192

The Usage Column
The Usage column displays the usage of the device. The disk list
command can display one of the values listed in Table 7-2.
Table 7-2. SCSI Disk Device Usage Values
Value Meaning
Detached The system detected that the diskset in the detached
state. When a diskset is detached, it is not available
for use.
DOS The device was prepared for use (initialized) with
MS-DOS partitions.
Initialized The device was prepared for use (initialized) with
arrays.
Not Initialized The device was not prepared for use (initialized)
with arrays.
Offline The device was present at boot time. However, the
device is either removed from the controller or it
failed.
Unowned The controller does not own the device.
The Shared Column
The Shared column displays the value YES if the device resides on a
shared channel and the value NO if the device does not reside on a
shared channel. In the example, the devices do not reside on a
shared channel.
The Rate Column
The Rate column displays the negotiated speed of the device, in
megabytes per second.
Related Information
disk commands:
disk initialize
disk show partition
disk show space
(page 7-3)
(page 7-15)
(page 7-22)
disk Commands
7-8