Syntax; Parameters; Switches; Examples - Adaptec RAID 2810SA Software Reference Manual

controller list
To list all controllers on a specified computer or display specific
information about the currently opened controller, use the
controller list command.

Syntax

controller list [/domain{=string}] [{string}]

Parameters

{string}
Specifies the computer name from which you want to display a
list of controllers or specific information about the currently
opened controller. If you do not specify a computer name, the
command displays only the controllers on the local computer.

Switches

/domain{=string}
Specifies the domain in which the specified computer resides.
If you do not specify this switch, the command assumes the
local domain.
This switch is supported on the following operating systems:
Windows NT
Windows 2000 (basic disk only)
Windows XP (basic disk only)

Examples

The following example shows how to list all controllers on a local
computer:
AAC0> controller list
Executing: controller list
Adapter Name Adapter Type
------------ ------------
\\.\AAC0 Adaptec 5400S
The following sections provide descriptions of the items in the
display.
controller Commands
Availability
------------
read/write
6-10