Related Information - Adaptec RAID 2810SA Software Reference Manual

The following example shows how to unlock array 0:
AAC0>container unlock 0
Executing: container unlock 0
Use the container list command (with the /full switch) after
using the container unlock command to display information
about the unlocked array, as in the following example:
AAC0>container list /full
Executing: container list /full=TRUE
Num Total Oth Stripe
Dr Label Type Size Ctr Size
-- ----- ------ ------ --- ------ ------- --------
F: 0 Volume 10.0MB
Note that the example eliminates some items in the container
list display so that you can see an example of the Lk column.
As a result of unlocking an array (in this example, array 0) with the
container unlock command, the Lk column displays a blank
(instead of an L) to indicate that the specified array is now
unlocked.

Related Information

container commands:
container list
container lock
Scsi
Usage C:ID:L
NTFS 0:02:0
(page 5-54)
(page 5-65)
container Commands
Lk
--
5-118