Related Information - Adaptec RAID 2810SA Software Reference Manual

Use the container list command (with the /full switch) after
using the container readwrite command to display
information about the array you just made read-write, as in the
following example:
AAC0>container list /full
Executing: container list /full=TRUE
Num Total Oth Stripe
Dr Label Type Size Ctr Size
-- ----- ------ ------ --- ------ ------- --------
F: 0 Volume 10.0MB
Note that the example eliminates some items in the container
list display so that you can see an example of the RO column.
As a result of making an array (in this example, array 0) read-write
with the container readwrite command, the RO column
displays blank (instead of an RO) to indicate that the specified array
is now read-write.

Related Information

container commands:
container list
container readonly
Scsi
Usage C:ID:L
NTFS 0:02:0
(page 5-54)
(page 5-72)
container Commands
RO
----
5-75