Adaptec RAID 2810SA Software Reference Manual page 163

Serial ata raid command line interface
Hide thumbs Also See for RAID 2810SA:
Table of Contents

Advertisement

The Battery State Item
The Battery State: shows that this controller is not equipped
with a battery.
The Component Revisions Items
Table 6-1 describes each of the Component Revisions: items.
This information is useful if you ever need to contact a technical
support representative.
Table 6-1. Component Revision Items
Component Revision Item
CLI:
API:
Service:
Remote API:
Miniport Driver:
Controller Software:
Controller BIOS:
Meaning
Displays the revision level of the Command
Line Interface. In the example, the revision
level is 3.0-0 (Build #5523).
Displays the revision level of the controller's
application programming interface (API). In
the example, the revision level is 3.0-0 (Build
#5478).
Displays the revision level of the network
services software. This item displays only if
the open controller resides on a remote
computer. In the example, the revision level is
2.1-0 (Build #2881).
Displays the revision level of the API that the
network services software uses on the remote
computer. This item displays only if the open
controller resides on a remote computer. In the
example, the revision level is 2.1-0 (Build
#2881).
Displays the version number of the miniport
portion of the AAC.SYS device driver. This
item displays only if the controller runs the
AAC.SYS device driver. In the example, the
revision level is 3.0-0 (Build #5131).
Displays the revision level of the controller
software. In the example, the revision level is
3.0-0 (Build #5478).
Displays the revision level of the controller
BIOS. In the example, the revision level is 3.0-1
(Build #5523).
controller Commands
6-4

Advertisement

Table of Contents
loading

Table of Contents