Related Information - Adaptec RAID 2810SA Software Reference Manual

Executing: container set cache 0
After setting cache parameters for a specific array, use the
container show cache command to display cache parameter
information, as in the following example:
AAC0>container show cache 0
Executing: container show cache 0
Global container Read Cache Size
Global container Write Cache Size : 1970176
Read Cache Status
Write Cache Status
Stream Detection Status

Related Information

container commands:
container release_cache
container show cache
: 5345280
: ENABLED
: ENABLED
: ENABLED
(page 5-83)
(page 5-109)
container Commands
5-99