State
Meaning
The task failed and is no longer running.
BAD
The task successfully completed or the task is no longer
DNE
running (that is, the task is done).
The task is running.
RUN
The task was suspended. Typically, you suspend a task with
SUS
the
task suspend
The controller reported an unknown status for the task.
UNK
The Specific1 Column
The Specific1 column displays additional information for certain
tasks that appear in the Task Id column. Table 9-3 lists the tasks for
which the task list command can display additional
information. Table 9-3 also describes the additional information that
task list can display.
Table 9-3. Additional Specific1 Information
Task
. Refers to the verify with
Verify
no repair of bad blocks task, which
runs as a result of using the
command without the
verify
/repair
switch.
Refers to the scrub task,
Scrub.
which runs as a result of using the
command.
array scrub
The Specific2 Column
The Specific2 column displays additional information for certain
tasks that appear in the Task Id column. Table 9-4 lists the tasks for
which the task list command can display additional
information. Table 9-4 also describes the additional information that
task list can display.
Table 9-2. State Values
command.
Additional Information
Displays the number of bad blocks
found with no replacement.
disk
The example displays zeroes,
which signifies no errors found.
Displays the number of sectors
that were different.
task Commands
9-6