The Func Item - Adaptec RAID 2810SA Software Reference Manual

The Func Item

The Func item displays the type of task running on the controller.
Table 3-7 describes the values that the Func item can display.
Value Meaning
File system verify task.
FSV
File system extend task. The array extend mvolume and
FSX
array extend volume commands cause the FSX value to
display.
array format task with a FAT file system specified. The array
FTF
format command with the /file_system switch set to
FAT causes the FTF value to display.
Mirror set create or multilevel mirror set create task. The
MCR
array create mirror and array create mmirror
commands cause the MCR value to display.
Merge a broken mirror task.
MMR
The array merge command causes the MMR value to
display.
array scrub task. The array scrub command causes the
MSC
MSC value to display.
array format task with an NTFS file system specified. The
NTF
array format command with the /file_system switch
set to NTFS causes the NTF value to display.
RAID-5 rebuild task.
R5R
RAID-5 set create task with the scrub method specified. The
R5S
array create raid5 command with the /scrub switch
specified causes the R5S value to display.
array reconfigure task. The array reconfigure command
RCF
causes the RCF value to display.
Verify all blocks on a SCSI disk device task. The disk
SCV
verify command causes the SCV value to display.
Clear an entire SCSI disk task. The disk zero command
SCZ
causes the SCZ value to display.
Verify all blocks and repair bad blocks on a SCSI disk device
SVR
task. The disk verify command with the /repair switch
causes the SVR value to display.
Syntax and Conventions for CLI Commands
Table 3-7. Function Values
3-11