Parameter; Switches - Adaptec RAID 2810SA Software Reference Manual

logfile start
To begin the logging of all CLI command line activity to a specified
file, use the logfile start command. CLI command line activity
includes the associated output the CLI command displays.
The CLI continues to log command output until you close the CLI or
you explicitly end the logfile with the logfile end command.
Syntax
logfile start [/append{=boolean}] {string}

Parameter

{string}
Specifies the name of the file to contain CLI command line
activity. On Windows, use the Windows NT/Windows 2000
(basic disk only)/Windows XP (basic disk only) file name
conventions. If the file name has spaces, use quotation marks
("") to enclose the string.
On NetWare, use the NetWare file name conventions.
On UNIX, use the UNIX file name conventions.

Switches

/append{=boolean}
Specifies whether to append all CLI command line activity to
an existing output file, if one exists. If you set this switch to
TRUE, the command appends the CLI command line activity to
the file specified in {string}.
This switch defaults to FALSE (that is, the command does not
append CLI command line activity to an existing output file).
Examples
The following example (Windows NT/Windows 2000 (basic disk
only)/Windows XP (basic disk only)) logs all output to a file called
c:\ctrloginfo\aac0log17Nov01.txt.
logfile Commands
8-3