controller show automatic_failover
To display the automatic failover status (enabled or disabled) for
the specified controller, use the controller show
automatic_failover command.
Syntax
controller show automatic_failover
Examples
The following example shows that the controller's automatic
failover is currently disabled:
AAC0> controller show automatic_failover
Executing: controller show automatic_failover
Automatic failover DISABLED
Related Commands
array commands:
I
array set failover
I
array set global_failover
controller commands:
I
controller set automatic_failover
(page
3-95)
(page
controller Commands
3-97)
(page
4-17)
4-21