Table of Contents
Advertisement
Controller Menu
4.3.3
Figure 32
Controller menu
The Controller Menu contains the following options:
Properties:
Configure Unused Storage:
Change Host/LUN mapping:
Delete Storage Configuration:
Backup Controller Configuration:
Restore Controller Configuration:
Reboot:
Shutdown:
Stop Partner Controller:
Restart Partner Controller:
Update Firmware:
Edit WWN Table:
Disk Scrubbing:
60
Allows you to change or modify various parameters for the selected controller.
Configures unused storage with assistance or manually.
Opens the Host/LUN mapping dialog box for you to modify the mapping.
Deletes the configuration of the selected controller.
Saves the configuration.
Downloads a controller configuration from a file to the controller.
Reboots the controller and brings the controllers out of conservative cache.
Sets the controller into conservative cache mode and prepares for a reboot. See 7.10
Shutting Down a Controller on page 195 for more information.
If a running partner controller exists, this feature forces the partner controller to go
Offline and puts the system in a failover state. This item is disabled if any of the
following conditions exist:
•
If a partner controller is not running
•
If a long operation task is running.
If a running partner controller has stopped, this feature brings the partner controller
back online and resumes Duplex mode. This item is disabled if any of the following
conditions exist:
•
If a running partner controller exists
•
If a long operation task is running.
Updates the selected controller's firmware.
Contains entries for every host that has ever accessed the controller. Allows you to
remove old host references from the table.
Causes all RAID configured drives and hot spares (no un-configured drives) to be
checked periodically, to identify potential problems before data is written to or
Spheras Storage Director Installation and User Guide
Advertisement
Table of Contents
