Dos Utilities; Using The Adaptec Flash Utility (Afu - Adaptec RAID 21610SA Installation And User Manual

B

DOS Utilities

In this Appendix...

Using the Adaptec Flash Utility (AFU)

B-1
Using the Array Configuration Utility (ACU) B-11
Using the Adaptec Flash Utility (AFU)
®
The Adaptec Flash Utility (AFU) is a DOS application used to
update the flash EEPROM components on one or more Adaptec
SCSI RAID controllers. The utility can also be used to verify a
controller's current flash contents against the flash images in a
specified file or to save a controller's current flash contents to a file.
Your Adaptec RAID controller uses nonvolatile flash to store on-
board software, such as BIOS, microprocessor kernel, and monitor.
Whenever it becomes necessary to update any of those components
you can update your controller's flash components using the AFU.
AFU updates the controller's flash by reading flash image data
from a supplied User Flash Image (UFI) file and writing it to the
controller's flash components. A UFI file contains all of a
controller's flash images, as well as information about each image.
It also includes general controller information, such as controller
type, to ensure that AFU uses the correct UFI file when updating
the controller's flash.
B-1