Installing On Red Hat Or Suse Linux; Installing On Netware; Managing Your Storage Space - Adaptec 58300 - SAS Storage Controller 300 MBps Installation And User Manual

Continue with
6

Installing on Red Hat or SuSE Linux

To install the module on Red Hat or SuSE Linux:
Insert and mount the RAID Installation CD:
1
Red Hat— mount /dev/cdrom /mnt/cdrom
SuSE
— mount /dev/cdrom /media/cdrom
UL 1.0
— mkdir /mnt/cdrom /mnt/cdrom
Install the module RPM:
2
rpm -Uvh mount-point/xxx/yyy.rpm
where
mount-point
and
yyy.rpm
Run fdisk, mkfs, and create mount points for any new disk drives.
3
Continue with
4

Installing on NetWare

Note:
Before you begin, ensure that your NetWare operating system has been upgraded to
the minimum patch level specified by Novell. Refer to the Novell Web site for more
information.
To install the driver on NetWare:
Start your computer.
1
From the NetWare server console prompt, type
2
From the Device types menu, select Continue, then press Enter.
3
From the Device type option, select Modify, then press Enter.
4
Select Storage Adapters, then press Enter.
5
From the Additional Driver Options menu, select Modify, then press Enter.
6
From the Driver Name menu, press the Insert key.
7
Insert the driver disk, press the Insert key, then press F3.
8
From the A:\ prompt, press Enter.
9
The driver installs.
From the Additional Driver Option menu, select Return to driver summary, then press
10
Enter.
From the Driver type menu, select Load on Additional Driver Options.
11
After the driver loads, select Continue.
12
Continue with
13
Chapter 8: Installing the Driver on an Existing Operating System
Managing Your Storage Space on page
is the specific mount point on the Linux system,
is the rpm file.
Managing Your Storage Space on page
Managing Your Storage Space on page
40.
is the driver path,
xxx
40.
, then press Enter.
load hdetect
40.
39
●