Parameter Unreceived - Mitsubishi Electric MELSEC Q Series Reference Manual

10.4.4

Parameter unreceived

The following explains the procedures to be taken when no parameters have been received since no control station
exists.
Normal
station Selected
No.1 station
Normal station
No.4
548
Normal station
No.2
Normal station
No.3
Select the own station.
Stations equivalent to the maximum number of stations that can be
connected are displayed because no parameters have been received.
An error has occurred in the station No.1.
Click the error details button.
The Error Factor field indicates that parameters have not been received.
Take corrective actions according to the troubleshooting.