Network Settings - Mitsubishi Electric MELSEC Q Series Reference Manual

.
6.2

Network Settings

Make settings for configuring the network.
1.
Open the "MELSECNET/CC IE/Ethernet Module Configuration" window in the programming tool.
Project window
2.
Configure settings with reference to the description below.
3.
Click the
Item
Network Type
Starting I/O No.
Network No.
Total Stations
Group No.
Station No.
Mode
Station No. setting method
180
[Parameter] [Network Parameter]
button.
Select the station type of the CC-Link IE Controller Network module.
Set the start I/O number of the CC-Link IE Controller Network module in 16-point units.
Set a network No. of the network to which the CC-Link IE Controller Network module is
connected.
When a control station is selected in "Network Type", set the total number of stations in
one network.
Set a group No. for performing transient transmission by group specification.
Set a station No. of the CC-Link IE Controller Network module.
Select an operation mode of the CC-Link IE Controller Network module.
For Universal model QCPUs, select how to set station Nos. of normal stations.
[Ethernet/CC IE/MELSECNET]
Description