Own Station No. Duplication - Mitsubishi Electric MELSEC Q Series Reference Manual

10.4.7

Own station No. duplication

The following explains the procedures to be taken when station No. is duplicated.
(1) Turning ON all stations simultaneously
(a) When a programming tool connected station is normally operating
Control
Selected Normal station
station
No.1 station No.2
Normal station Normal station
No.3 No.3
Select the own station.
Multiple stations with the station No.3 are displayed, indicating that the
same station No. is used for multiple stations. Change the station No.
CHAPTER 10 TROUBLESHOOTING
553
10