Mitsubishi Electric MELSEC Q Series Reference Manual page 47

Item
Laser class (IEC 60825-1)
Number of occupied I/O points
Voltage
Current
Terminal screw size
Applicable solderless
terminal
External
Applicable wire size
power
Tightening torque
supply
Allowable
momentary power
failure time
Noise immunity
Internal current consumption (5V
DC)
External dimensions
Weight
*1 A Universal model QCPU can be set to a station No. within the range of No.1 to No.120.
For a module other than Universal model QCPUs, station No.1 to No.64 can be set.
*2 A station with a Basic model QCPU or safety CPU operates as a normal station. (It cannot be set to a control station.)
*3 All I/O signals of the CC-Link IE Controller Network module are used by the system. (Use prohibited)
*4 Two I/O slots are occupied.
In the Start I/O No. field of Network parameter, set a value obtained by adding 10
slot. Note that 0 point can be set instead of 16 points for the first half in I/O assignment of PLC parameter.
When the module is installed to slot 0, set 10
Ex.
(When setting 0 points for the slot 0 by I/O assignment setting, set 0
QJ71GP21-SX
*3
32 (Intelli.: 32 points)
No external power supply function
0.85A
98 (H) × 27.4 (W) × 90 (D) [mm]
0.18kg
to the start I/O number.
H
CHAPTER 3 SPECIFICATIONS
Specification
QJ71GP21S-SX
Class 1 laser product
48 (I/O assignment: Empty first half: 16 points,
Latter half: 32 points for intelli.)
20.4V to 31.2V DC
0.3 to 1.25mm
0.42 to 0.58N•m
1ms (Level PS1)
By noise simulator of 500Vp-p noise voltage, 1µs
noise width, and 25 to 60Hz noise frequency
98 (H) × 55.2 (W) × 90 (D) [mm]
to the I/O No. of the module-installed
H
for the start I/O number.)
H
*3*4
0.28A
M3
R1.25-3
2
0.90A
0.28kg
45
3