Mitsubishi Electric MELSEC Q Series Reference Manual page 428

(d) RECVS instruction settings
Control data settings for the RECVS instruction are shown below.
(S1)+0
(S1)+1
(S1)+2
(S1)+3
(S1)+4
(S1)+5
(S1)+6
(S1)+7
(S1)+8
(S1)+9
(e) Program example
The following example program is written to the CPU module of station No.2.
To execute an interrupt program, "EI" (Enable Interrupt) must be executed in the main program.
426
Device
D370 Execution/Error completion type
D371 Completion status
D372 Own station channel
D373 Channel used by sending station
D374 Network No. of sending station
D375 Sending station No.
D376 (Unused)
D377 (Unused)
D377 (Unused)
D379 Receive data length
Main program
Item
0
(Set by the system, no setting required)
5
(Set by the system, no setting required)
0
0
0
(Set by the system, no setting required)
Processing program for read completion
Set value
—
—
—
Control data setting
for RECVS instruction
Execution of RECVS
instruction