Mitsubishi Electric MELSEC Q Series Reference Manual page 529

Item
Change Module
Select Station
Change Select Station
Network information display
Select station network device
status display
*1*2
Communication Test
*3
IP Communication Test
*1*2
Link Start/Stop
*1*2
Logging
System Monitor
Remote Operation
*1 Selectable when the selected station is connected to the programming tool (the own station). Not selectable when it is
any other station.
*2 Not selectable in circuit test mode.
*3 Displayed only when GX Works2 is used.
When two or more CC-Link IE Controller Network modules are mounted, the "Select
Diagnostics Destination" window is displayed by clicking this button.
The network to be diagnosed is changed in the "Select Diagnostics Destination" window.
Specifies station No. of selected station.
Enter the station No. in "Select Station", and click this button to change the selected
station.
Page 528, Section 10.3.1
Page 531, Section 10.3.2
Page 174, Section 5.7.1
Page 113, Section 4.3.3
Page 91, Section 4.1.12
Page 533, Section 10.3.3
Page 536, Section 10.3.4
Page 540, Section 10.3.5
CHAPTER 10 TROUBLESHOOTING
Description
10
527