Mitsubishi Electric MELSEC Q Series Reference Manual page 636

MELSECNET/H
No. Name
Line error on the reverse loop
SW00CD
side
SW00CE Number of loop switches
SW00CF Loop switch data pointer
SW00D0 to
Loop switch data
SW00DF
SW00E0 to
Switch request station
SW00E7
SW00E8 to
Module type of each station
SW00EB
Low-speed cyclic
SW00EC transmission start execution
results
SW00EE Transient transmission error
Transient transmission error
SW00EF
pointer
SW00F0 to Transient transmission error
SW00FF history
Remote sub-master station
SW01C4
switching result
SW01C8 Send LY device number
SW01C9 Receive LX device number
SW01CC Send LB device number
SW01CD Receive LB device number
SW01CE Send LW device number
SW01CF Receive LW device number
SW01E0 to Network type consistency
SW01E3 check
634
CC-Link IE Controller Network
No. Name
OUT-side line error
SW006A occurrence rate (Max.)
SW006B OUT-side line error
occurrence rate (present.)
SW006E Number of loop switches
— —
SW0064 Own station's loop status
SW0065 Loopback information
— —
— —
— —
SW006F Transient transmission error
— —
— —
— —
— —
— —
— —
— —
— —
— —
— —
Precautions for
Compatibility
replacement
• This operation in the
MELSECNET/H can be
substituted by OUT-side
line error occurrence rate
in the CC-Link IE
Controller Network
module.
(Content
• The station No. for the
changed)
station that receives an
error frame at OUT-side
can be checked by
SW0130 to SW0137 and
SW0150 to SW0157.
(No. changed)
Delete the sequence
— program for the
corresponding part.
• The cause of loopback
can be checked by Own
station's loop status
(SW0064).
(Content
• The loop status of a
changed)
network can be checked
by Loopback information
(SW0065).
Delete the sequence
— program for the
corresponding part.
(No. changed)
The error history can be
checked by CC IE Control
(Content
diagnostics.
changed)
Delete the sequence
— program for the
corresponding part.
None
None