10.3.5
Remote operation
The operating status of the CPU module that is connected to a network can be changed.
1.
To open the "Remote Operation" window in the programming tool, perform any one of the
following operations.
• Click
• Select [Online]
2.
The "Remote Operation" window is displayed.
3.
Set the following item and click
Connection Channel List
Specify Execution Target
Operation
Operation during RUN
540
button in the "CC IE Control Diagnostics" window.
[Remote Operation] menu.
Item
The connection target information is displayed.
Set a target station of remote operation.
• Currently Specified Station: Remote operation is executed to the displayed "Target
PLC".
• "Target PLC" can be changed by changing "Select Station" in the "CC IE Control
Diagnostics" window.
• All Stations: Remote operation is executed to all stations in the network specified in
"Specify Execution Target".
• Specified Group: Remote operation is executed to the specified group No. in the
network specified in "Specify Execution Target".
Select the operating status to be changed.
Select the operation of the device memory and signal flow during RUN.
button.
Description