Mitsubishi Electric MELSEC Q Series Reference Manual page 613

Function
Group cyclic transmission function
Compatible with Redundant CPUs
• Pairing setting for redundant systems
Points for link dedicated instructions
(READ/SREAD/WRITE/SWRITE) increased to 8192
words
• Channels 9 and 10 specified for use of the own
station
• Read/write data length specified to 961 words or
more
Modified CC IE Control diagnostics
• Display of stations with no parameter setting
Supporting transient requests from CC-Link IE
Controller Network compatible devices, and new CC-
Link dedicated instructions added
• RIRD/RIWT
Increase of send points by mounting multiple network
modules of the same network No.
Module error history collection function
Send points extension function
Supporting the IP packet transfer function
*1 Other than the Q02U/Q03UD/Q04UDH/Q06UDHCPU can be used from the first released products.
*2 Other than the Q02U/Q03UD/Q04UDH/Q06UDH/Q13UDH/Q26UDHCPU can be used from the first released products.
*3 CPU modules that can be used differ depending on the connection path. (
(6) For Safety CPUs
Function
Compatible with QS001CPU
Modified CC IE Control diagnostics
• Display of stations with no parameter setting
The number of refresh parameter settings per module
(except for SB/SW) is increased to 64.
First 5 digits of serial No.
CC-Link IE
Controller CPU
Network module
module
10042 or
*2
later
Function
version D or
later
—
10092 or later
—
11043 or later
12052 or later
12052 or later
14022 or
14112 or later
*3
later
First 5 digits of serial
No.
CC-Link IE
Controller CPU
Network module
module
—
Function
version D or
later
14052 or later
Programming tool
version
GX
GX Works2
Developer
Version 1.04E
or later
Version
8.68W or later
Not available
— —
Version Version 1.04E
8.68W or later or later
— —
Version 8.76E Version 1.07H
or later or later
Version 1.09K
or later
Version 1.34L
Not available
or later
Version 1.98C
or later
—: Irrelevant to serial No. or software version
Page 107, Section 4.3.1)
Programming tool version
GX
GX Works2
Developer
Version 8.65T
or later
Not available
Version 8.107M
or later
—: Irrelevant to serial No. or software version
APPENDICES
Reference
section
Page 83,
A
Section 4.1.8
Page 138,
Section 4.7.1
Page 324,
CHAPTER 9
Page 528,
Section 10.3.1
Page 324,
CHAPTER 9
Page 84,
Section 4.1.9
Page 511,
Section 10.2.1
Page 180,
Section 6.2
Page 106,
Section 4.3
Reference
section
Page 40,
Section 2.3
Page 528,
Section 10.3.1
Page 204,
Section 6.5.1
611