Mitsubishi Electric MELSEC Q Series Reference Manual page 241

(1) Concept of routing parameters
To each station on the network, set a relay station in the own network to transmit data to another network.
Routing parameters set to each station on Network No.
Ex.
"To go to network No.
1
Routing parameters are not necessary for stations that do not send any transient transmission to other networks, however, it
is recommended to set the same routing parameters to each network.
Network No.
(Relay station)
, data passes through station No.
Target Relay
Network No. Network No.
CHAPTER 6 PARAMETER SETTING
Network No.
of its own network No. ."
Relay
No setting is required for the
Station No.
relay station because data
are transmitted via the station.
6
239