Mitsubishi Electric MELSEC Q Series Reference Manual page 271

(1) Setting of control station (No. 1)
(a) Quantity setting
1.
Fill in the quantity setting parameter sheet. (
Control station (No. 1)
Ex.
Item
Network Type
Starting I/O No.
Network No.
(For the control station only)
Total Stations
Group No.
Station No.
Mode
Station No. setting
method
2.
Complete settings in the programming tool based on the contents filled in the parameter sheet.
CC-Link IE Controller Network module
No.
CC IE Control (Control Station)
CC IE Control (Normal Station)
CC IE Control Extended Mode (Control Station)
CC IE Control Extended Mode (Normal Station)
(Range: 0000
(Range: 1 to 239)
(Range: 2 to 120)
(Range: 0 to 32)
(Range: 1 to 120)
Online
Offline
H/W Test
Self-Loopback Test
Circuit Test (for the control station only)
Test between Station
Specify Station No. by Parameter
Specify Station No. by Program
Page 651, Appendix 5.2)
CC IE Control (Control Station)
CC IE Control (Normal Station)
CC IE Control Extended Mode (Control Station)
CC IE Control Extended Mode (Normal Station)
to 0FE0 )
H H
(For the control station only)
Online
Offline
H/W Test
Self-Loopback Test
Circuit Test (for the control station only)
Test between Station
Specify Station No. by Parameter
Specify Station No. by Program
CHAPTER 8 PROGRAMMING
No.
(Range: 0000 to 0FE0 )
H H
(Range: 1 to 239)
(Range: 2 to 120)
(Range: 0 to 32)
(Range: 1 to 120)
269
8