Mitsubishi Electric MELSEC Q Series Reference Manual page 632

MELSECNET/H
No. Name
SW0055 Parameter setting status
Current control station
SW0056
Current remote master station
Designated control station
SW0057
Designated remote master
station
SW0059 Total number of link stations
SW005A Maximum baton pass station
Maximum cyclic transmission
SW005B
station
SW005C I/O master station (Block 1)
SW005D I/O master station (Block 2)
SW0064 to
Reserved station designation
SW0067
SW0068 Communication mode
SW006B Maximum link scan time
SW006C Minimum link scan time
SW006D Current link scan time
SW006E Low-speed cyclic scan time
630
CC-Link IE Controller Network
No. Name
SW0055 Parameter setting status
SW0056 Current control station
SW0057 Designated control station
SW0059 Total number of link stations
Maximum baton pass
SW005A
station
Maximum cyclic
SW005B
transmission station
SW005C I/O master station (Block 1)
SW005D I/O master station (Block 2)
SW00C0
Reserved station
to
specification
SW00C7
SW0063 Communication mode
SW0060 Maximum link scan time
SW0061 Minimum link scan time
SW0062 Current link scan time
— —
Precautions for
Compatibility
replacement
—
—
(No. changed)
(No. changed)
• The same value is stored
in the control station and
(No. changed)
the normal station in the
CC-Link IE Controller
(No. changed)
Network module.
• The value to be stored is
an actual measurement
value of the link scan
time.
• When setting a constant
link scan, the setting
value of the constant link
scan is stored.
(No. changed) • When an actual
measurement value of the
link scan time is larger
than a setting value of the
constant link scan, the
actual measurement
value of the link scan time
is stored.
Delete the sequence
— program for the
corresponding part.
None