Mitsubishi Electric MELSEC Q Series Reference Manual page 466

• When failed
Sequence scan
Start contact
Own station CPU
Completion device
(Device specified in (D2))
Completion status indication
device (Device of (D2)+1)
Send/receive instruction (1)
processing result (SW0030)
CC-Link IE Controller
Network module
(4) Error
When a link dedicated instruction failed, the error details can be confirmed by either of the following methods.
(a) With the programming tool
The error details can be checked in the CC IE Control diagnostics. (
(b) Checking devices
Completion status indication device ((D2)+1) is turned ON, and an error code is stored in Send/receive
instruction processing result (SW0030 to SW0037).
SW0030
SW0031
SW0032
SW0033
SW0034
SW0035
SW0036
SW0037
Check the error and take corrective actions according to the error code. (
464
RTMRD
0 END
Target station error
No.
Send/receive instruction (1) processing result
Send/receive instruction (2) processing result
Send/receive instruction (3) processing result
Send/receive instruction (4) processing result
Send/receive instruction (5) processing result
Send/receive instruction (6) processing result
Send/receive instruction (7) processing result
Send/receive instruction (8) processing result
0 END 0
Channel 1
Name
END 0 END 0 END
1 scan
Error code
Page 526, Section 10.3)
Page 511, Section 10.2)