Mitsubishi Electric MELSEC Q Series Reference Manual page 536

Item
Display Station
*1
Switch Transmission Path
Transient Transmission
*1
Errors
Save Error Log
*1 Up to 100 logs are displayed, and when the maximum is reached, they will be erased in sequence from the oldest one.
Note that when the window is closed, logs numbered 17 or higher are deleted. To retain them, click on the Save error
log.
*2 If a transient transmission error is detected during start-up of the CC-Link IE Controller Network module, the time of the
error may be displayed as blank.
534
Displays the network No., group No., and station No. of the connected station.
Loop Status Displays the status of a loop.
Loop station Displays a station where loopback occurs at IN-side and OUT-side at loopback.
Occurrence Date Displays a time when a communication path is switched.
Error Code
Displays error codes. (
Target Network Displays network No. of the station where an error was detected.
Target Station No. Displays station No. of the station where an error was detected.
*2
Displays a time when a transient transmission error is detected
Occurrence Date
Saves the description of monitor detail in CSV file.
Description
Page 511, Section 10.2)