Mitsubishi Electric MELSEC Q Series Reference Manual page 622

Cc-link ie controller network

Hide thumbs Also See for MELSEC Q Series:

Table of Contents

(e) Other functions

Station No. setting by sequence program

IP packet transfer function

For Universal model QCPUs, the station No. of a normal station (own

station) can be set in the sequence program. (UINI instruction)

Communications in a protocol, such as FTP and HTTP, using the specified

IP address of an Ethernet device can be performed over CC-Link IE

Controller Network.

With this function, two networks of CC-Link IE Controller Network and

Ethernet are not required, resulting in reduced wiring cost.

Show Quick Links

Table of Contents

Melsec qj71gp21-sx Melsec qj71gp21s-sx