Shift Link Bracket/Neutral Switch - Honda BF135A Manual

2. SHIFT LINK BRACKET/NEUTRAL SWITCH

a. REMOVAL
Remove the following parts.
– Engine cover (P. 4-2)
– Front separate cover (P. 4-7)
– L./R. engine under cover (P. 4-9)
– Remote control cable/grommet (P. 17-2)
1) Remove the throttle rod linkage pivot from the throttle plate.
2) Remove the two 6 x 18 mm flange bolts from the shift link bracket assembly.
Remove the link pin of the shift link bracket assembly from the shift arm, and remove the shift link bracket assembly.
3) Move the shift arm to the "N" (Neutral) position. Remove
the 12 mm snap ring and the 12 mm washer from the shift
shaft B.
17-11
[1]
THROTTLE PLATE
[5]
SHIFT ARM
[4]
LINK PIN
[1]
12 mm SNAP
RING
[2]
12 mm WASHER
[3]
SHIFT ARM
[Move to "N"
(Neutral) position.]
[2]
THROTTLE ROD
6 x 18 (2)
[3]
SHIFT LINK BRACKET
ASSEMBLY