Honda BF135A Manual page 481

8) Apply soapy water to the circumference of the 23 x 36 x 6
mm water seals.
9) Drive the 23 x 36 x 6 mm water seals one by one in the
water seal housing using the special tools. Note the
installation direction of the water seals.
Be sure to apply grease to the water seal mating surfaces
before installation.
TOOLS:
Driver
Attachment, 32 x 35 mm
10) After installing the water seals, apply grease to the water
seal lips.
11) Apply grease to the circumference of the new 58.5 x 3.5
mm O-ring and position it on the water seal housing.
12) Install the water seal housing so that the concave faces in
the cruising direction, and tighten it with the two 6 x 20 mm
flange bolts.
14-14
[1] 23 x 36 x 6 mm
WATER SEALS
07749-0010000
07746-0010100
[4]
DRIVER
07749-0010000
[6]
WATER SEAL
HOUSING
[4]
VERTICAL
SHAFT
[2] <Water seal installation
direction>
[3]
(Apply grease to the
water seal mating
surfaces and the lips.)
[5]
ATTACHMENT,
32 x 35 mm
07746-0010100
6 x 20
[1]
WATER SEAL
HOUSING
[2]
CONCAVE
[3]
58.5 x 3.5 mm
O-RING