Honda BF135A Manual page 284

c. INTAKE MANIFOLD DISASSEMBLY/ASSEMBLY
8 x 60 (4)
22 N·m (2.2 kgf·m,
16 lbf·ft)
[10]
THROTTLE BODY
[9]
THROTTLE BODY GASKET
Do not reuse.
[8]
IAC VALVE GASKET
Do not reuse.
[7] IAC VALVE
5-131
[1]
INTAKE MANIFOLD GASKET (4)
ASSEMBLY:
• Do not reuse.
• Install by aligning the projection
on the gasket with the groove in
the intake manifold.
[1]-1
PROJECTION
[1]-2
GROOVE
[12]
COLLAR (2)
[11]
GROMMET (2)
8 x 45 (2)
22 N·m (2.2 kgf·m, 16 lbf·ft)
[2] SOLENOID VALVE TUBE
ASSEMBLY:
Connect the solenoid valve tube to the top of the
intake air cut-off solenoid valve, and the
diaphragm tube to the lower joint of the intake air
cut-off solenoid valve.
[2]-3 UP
[5]
SHUTTER VALVE DIAPHRAGM
INSPECTION: P. 5-110
Do not disassemble the
shutter valve diaphragm.
Replace as an assembly
of the intake manifold
assembly.
[6]
INTAKE MANIFOLD
ASSEMBLY
BF135A•BF150A
[2]-1
DIAPHRAGM
TUBE
[2]-2
SOLENOID
VALVE TUBE
[3]
DIAPHRAGM TUBE
[4]
INTAKE AIR CUT-OFF
SOLENOID VALVE
5 x 12