5) Remove the two 8 x 30 mm hex. bolts and the two 8 mm
washers, then remove the under cover front bracket.
DISASSEMBLY:
1) Remove the 6 mm E-ring and the 8 mm washer from the lock front shaft.
2) Remove the lock front shaft from the under cover front bracket.
Remove the cover lock lever, two cover lock bushing As, 10 mm washer and the two 10 mm wave washers.
Check the cover lock bushing A for scores, scratches and other damage. Replace the cover lock bushing A with a new
one if necessary.
[8]
LOCK FRONT
SHAFT
[7]
COVER LOCK
BUSHING A (2)
[6]
10 mm WASHER
[5]
10 mm WAVE
WASHER (2)
[4] COVER LOCK LEVER
4-21
[1]
UNDER COVER
FRONT BRACKET
[2] 8 mm WASHER (2)
[3] 8 x 30 mm
HEX. BOLT (2)
[1]
UNDER COVER
FRONT BRACKET
[3] 6 mm E-RING
[2]
8 mm WASHER