Front Separate Cover - Honda BF135A Manual

2. FRONT SEPARATE COVER

a. REMOVAL
1) Remove the engine cover (P. 4-2).
2) Loosen the undercase grommet band and remove it from the remote control cable grommet.
3) Remove the 6 x 17 mm special bolt and the three 6 x 25 mm screws, then detach the front separate cover.
4) Remove the front separate cover.
[1]
FRONT SEPARATE
COVER
b. INSTALLATION
1) Install the front separate cover by aligning the recess at the
rear of the front separate cover (i.e. R. engine under cover
side) with the projection of the R. engine under cover.
2) Install by aligning the projection at the front (i.e. under
cover front bracket side) of the front separate cover with
the recess of the under cover front bracket.
4-7
[2]
UNDERCASE
GROMMET BAND
[1] <Rear side>
[5]
PROJECTION
[4]
R. ENGINE
UNDER
COVER
[2] RECESS
[6] <Front side>
[5]
PROJECTION
[3]
FRONT SEPARATE
COVER
[3]
6 x 17 mm SPECIAL
BOLT
[4]
6 x 25 mm SCREW (3)
[2]
RECESS
[3]
FRONT
SEPARATE
COVER
[7]
UNDER COVER
FRONT BRACKET