10) Connect the oil tube to the mounting case.
After connection, check that the oil tube is inserted in the
mounting case securely.
11) Install the R. side cover bracket assembly on the engine
assembly and tighten the two 6 x 22 mm flange bolts.
12) Connect the breather tube and the main wire harness to the
cylinder head cover.
NOTICE
Route the main wire harness so it sets on the projections on
the cylinder head cover securely.
13) Install the following parts.
– Ignition coil/spark plug (P. 3-8)
– L./R. engine under covers (P. 4-14)
– Engine cover (P. 4-2)
10-42
[1]
OIL TUBE
[2]
MOUNTING CASE
[1]
PROJECTION
[2]
MAIN WIRE
HARNESS
[3]
BREATHER
TUBE
[1]
R. SIDE COVER
BRACKET ASSEMBLY
6 x 22 (2)
[2]
MAIN WIRE
HARNESS