Neutral Release Lever; Engine Switch (Ignition Switch) - Honda BF40D Manual

32ZZ4641.book 29 ページ ２０１８年８月３日 金曜日 午前９時４４分

Neutral Release Lever

(R1 type)
REMOTE CONTROL LEVER
NEUTRAL
RELEASE LEVER
(R2 type)
REMOTE CONTROL LEVER
NEUTRAL
RELEASE
LEVER
The neutral release lever is set on the
remote control lever to prevent an
accidental operation of the remote
control lever.
The remote control lever does not
operate unless it is moved while
pulling the neutral release lever up.
CONTROLS AND FEATURES (R type)

Engine Switch (Ignition Switch)

(R1 type)
START
ON
OFF ENGINE
SWITCH
This remote control is equipped with
an automotive type ignition switch.
On the side-mount type (R1 type),
the engine switch locates on your
side near the remote control box.
On the panel-mount type (R2 type)
and the top-mount type (R3 type), the
engine switch locates at the center of
the switch panel.
Key positions:
START: to start the engine.
ON: to run the engine after starting.
OFF: to stop the engine
(IGNITION OFF).
(R2, R3 types)
START
ON
OFF
ON
OFF START
ENGINE SWITCH
Do not leave the engine switch
(ignition switch) ON (key in ON
position) when the engine is not
running as the battery will
discharge.
The starter motor will not work
unless the remote control lever is in
the NEUTRAL position, and the clip
is in the emergency stop switch.
29