Remote Control Cable/Grommet - Honda BF135A Manual

1. REMOTE CONTROL CABLE/GROMMET

a. REMOVAL
Remove the following parts.
– Engine cover (P. 4-2)
– Front separate cover (P. 4-7).
1) Remove the remote control cable (shift side) shift pivot from the shift arm shift link pin.
2) Remove the remote control cable (throttle side) shift pivot from the throttle arm link pin.
3) Remove the remote control cables (shift and throttle sides) from the remote control cable plate and the remote
control cable grommet.
[1]
SHIFT PIVOT (2)
[9]
THROTTLE ARM
[8]
LINK PIN
[7]
SHIFT LINK PIN
[6]
SHIFT ARM
4) Release the indicator light 6P connector and the remote
control cable 14P connector from the neutral switch
bracket.
Disconnect the indicator light 6P connector and the remote
control cable 14P connector.
17-2
[5]
REMOTE CONTROL
CABLE PLATE
[4]
REMOTE CONTROL
CABLE GROMMET
[1] INDICATOR LIGHT
6P CONNECTOR
[3]
NEUTRAL SWITCH BRACKET
[2]
REMOTE
CONTROL CABLE
(Throttle side)
[3]
REMOTE CONTROL
CABLE
(Shift side)
[2] REMOTE CONTROL
CABLE 14P CONNECTOR