Honda BF135A Manual page 149

12) Apply marine grease to the outer surface of the 10 mm washer, two 10 mm wave washers and the cover lock bushing
A and to the inner wall of the lock front shaft hole in the under cover front bracket.
13) Install the two cover lock bushing As, 10 mm washer and the two 10 mm wave washers on the cover lock lever as
shown. Install the cover lock lever on the under cover front bracket.
14) Install the lock front shaft.
Install the 8 mm washer and the 6 mm E-ring on the lock front shaft.
[1]
LOCK FRONT
SHAFT
[5] (MARINE GREASE)
[9] COVER LOCK
BUSHING A (2)
[8] 10 mm WASHER
[7] 10 mm WAVE
WASHER (2)
[6] COVER LOCK LEVER
e. R. SIDE COVER BRACKET/L. SIDE COVER
BRACKET/UNDER COVER FRONT BRACKET
INSTALLATION
1) Install the R. side cover bracket with the two 6 x 22 mm
flange bolts.
2) Install the L. side cover bracket with the two 6 x 55 mm
flange bolts.
4-30
[2]
UNDER COVER
FRONT BRACKET
[5] (MARINE
GREASE)
[4] 6 mm E-RING
[3] 8 mm WASHER
[1]
R. SIDE COVER
BRACKET
6 x 22 (2)
[1] L. SIDE COVER
BRACKET
8 x 55 (2)