Honda BF135A Manual page 106

4) Install the strainer suspension on the fuel strainer cup so
that its projections are at the fuel strainer body side.
5) Install the fuel strainer (low pressure side) on the fuel
strainer stay securely.
6) Check that the center of the 5 x 12 mm screw at the fuel
tube C installation part is in line with the center of the
strainer suspension as shown.
7) Connect the fuel tube C to the "
strainer. Connect the fuel tube E to the "
the fuel strainer.
• After connecting the tubes, check for gasoline leakage.
8) Install the engine cover (P. 4-2).
3-17
" mark side of the fuel
" mark side of
[1] FUEL STRAINER BODY
[2] PROJECTIONS
[4] STRAINER
SUSPENSION
[1] FUEL
[2] "
STRAINER
STAY
[5] " " MARK
[6] 5 x 12 mm SCREW
[8] Screw center must be in line
with the suspension center.
[3] FUEL STRAINER
STAY
" MARK
[3]
FUEL TUBE E
[4]
FUEL TUBE C
[7]
STRAINER
SUSPENSION